At&t 2wire Dsl Router - Set 5 Static Ip Addresses

Have you ever simply bought a enterprise dsl plan from At&t, which incorporates 5 static ip addresses and would like to learn how to set them as much as keep away from paying a $200 charge. The first thing that you will need to do is use out what your default gateway ip tackle is on your 2wire dsl router. The simplest option to discover your default gateway ip is to go to the cmd immediate and kind in "ipconfig". You'll find the command prompt by going to the start button -> All Applications -> Accessories -> Command prompt. After the command immediate window opens, that is the place you will kind in ipconfig. (See Example Beneath) When you kind in "ipconfig" you must see some outcomes, that is where you will find what your default gateway. For example my default gateway is 192.168.10.

The next factor you need to do is sort you default gateway deal with into an online browser, equivalent to Internet Explorer or Mozilla Firefox. After you kind your default gateway ip handle into your internet browser, you need to get a display screen that looks like the one below.

After you have opened the configuration display on your 2wire dsl modem, you are going to wish to click on on the broadband link tab The broadband link tab is located near the highest of the screen.

After getting accessed the broadband link tab, you are going to then click on Superior setting located throughout the broadband hyperlink tab. Throughout the superior setting window, you are going to change your username slightly. What you're going to wish to doing is change USERNAME@sbcglobal.internet to USERNAME@static.sbcglobal.net. Then click the save button. (Confer with the picture under)

After a couple of minutes your router needs to be carried out configuring itself from its normal dynamic ip to a static ip. What you'll wish to do now's configure your router, so you possibly can assign different static ip addresses to your totally different community devices. The very first thing you will do is click on the House Network tab, positioned on the top of the screen.

You'll then click on on the Superior Setting tab situated within the Residence Community tab. Once you're on the advanced setting web page, find the Bridge Community setting and click enable. For the subnet masks I used 255.255.255.248. After you click save, you are then going to need to click on on Edit Handle Allocation tab. Within the edit deal with allocation settings page you are able to assign totally different static ip deal with to your completely different servers, pc and other networked devices.

When you click on save on the edit handle allocation tab, you will now should configure each machine to receive a static ip address. On a windows primarily based laptop, simply go into the command immediate window and kind in "ipconfig /release" then sort in "ipconfig /renew". If you're utilizing Vista, you will should run command prompt as administrator. Are you in search of more information on setting up your 2wire dsl modem.

Article Source: http://gamblingarticlessite.com

At&t 2wire Dsl Router – Configure Static Ip Addresses Static Ip Address For Vista Network

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated